Roller, Sybille; Pohl, C.; Behrmann, J. H. (2003): Triaxial shear strength investigations of sediments and sedimentary rocks from the Japan Trench, ODP Leg 186. Texas A&M University, Ocean Drilling Program, College Station, TX, United States, In: Suyehiro, Kiyoshi, Sacks, I. Selwyn, Acton, Gary D., Acierno, Michael J., Araki, Eiichiro, Ask, Maria V. S., Ikeda, Akihiro, Kanamatsu, Toshiya, Kim, Gil Young, Li, Jingfen, Linde, Alan T., McWhorter, Paul N., Mora, German, Najman, Yanina M. R., Niitsuma, Nobuaki, Pandit, Benoy K., Roller, Sybille, Saito, Saneatsu, Sakamoto, Tatsuhiko, Shinohara, Masanao, Sun, Yue-Feng, Proceedings of the Ocean Drilling Program, scientific results, Western Pacific geophysical observatories; covering Leg 186 of the cruises of drilling vessel JOIDES Resolution; Yokohama, Japan, to Yokohama, Japan; sites 1150 and 1151, 14 June-14 August 1999, 186, georefid:2004-011527

Abstract:
In order to determine the shear parameters of the forearc sedimentary strata drilled during Ocean Drilling Program Leg 186, West Pacific Seismic Network, Japan Trench, eight whole-round samples were selected from different depths in the drilled sections of Sites 1150 and 1151. Whereas Site 1150 lays above the seismically active part of the subduction zone, Site 1151 is situated in an aseismic zone. The aim of the triaxial tests was, apart from determination of the static stress strain behavior of the sediments, to test the hypothesis that the static stress strain parameter could differ for each sites. In order to simulate undrained deformation conditions according to the high clay mineral content of the strata, consolidated undrained shear tests were performed in a triaxial testing setup. Measurements of water content, grain density, organic content, and microtextural investigations under the scanning electron microscope (SEM) accompanied the compression experiments. After the saturation and consolidation stages were completed, failure occurred in the compression stage of the experiments at peak strengths of 280-7278 kPa. The stiffness moduli calculated for each sample from differential stress vs. strain curves show a linear relationship with depth and range between 181 and 5827 kPa. Under the SEM, the artificial fault planes of the tested specimen only show partial alignment of clay minerals because of the high content of microfossils.
Coverage:
West: 143.2000 East: 143.2000 North: 39.1100 South: 38.4500
Relations:
Expedition: 186
Site: 186-1150
Site: 186-1151
Supplemental Information:
Data report; available only on CD-ROM in PDF format and on the Web in PDF or HTML
Data access:
Provider: SEDIS Publication Catalogue
Data set link: http://sedis.iodp.org/pub-catalogue/index.php?id=10.2973/odp.proc.sr.186.115.2003 (c.f. for more detailed metadata)
Data download: application/pdf
This metadata in ISO19139 XML format